Once installed, please do not move or remove the bathroom mirror at will.
When installing, expansion bolts can be used. When drilling, pay attention to the variety of ceramic tiles. If it is all ceramic, use a water drill bit by bit, otherwise it is very easy to crack. If using glass adhesive for fixation, do not use acidic glass adhesive. Instead, choose neutral adhesive. Acid glass adhesive usually reacts with the material on the back of the mirror, causing speckles on the mirror surface. Before applying the adhesive, it is best to conduct a compatibility test to see if the adhesive is compatible with the material. The best effect is to use a specialized mirror adhesive.
1、 Installation height of bathroom mirrors
In the bathroom, it is common to stand and look in the mirror. The bottom edge of the bathroom mirror should be at least 135 centimeters above the ground. If there is a significant height difference between family members, it can be adjusted up and down again. Try to place the face in the middle of the mirror as much as possible to achieve better imaging results. Generally, it is better to keep the center of the mirror at a distance of 160-165 centimeters from the ground.
2、 Fixing method for bathroom mirrors
Firstly, measure the distance between the hooks behind the mirror, and then make a mark on the wall and make a hole at the mark. If it is a ceramic tile wall, it is necessary to first drill open the ceramic tile with a glass drill bit, then use an impact drill or electric hammer to drill in 3CM. After drilling the hole, put in a plastic expansion pipe, and then screw in the 3CM self tapping screw, leaving 0.5CM outside, and hang a mirror.
3、 Pay attention to protecting the wall when drilling holes
When installing, be careful not to damage the wall, especially when hanging mirrors on ceramic tile walls. Try to drill holes at the material joints. It is best to use a water drill for drilling.
4、 Need to know the fixing method of glass adhesive
If using glass adhesive to fix the mirror, be careful not to use acidic glass adhesive. Instead, choose neutral adhesive. Acid glass adhesive usually reacts with the material on the back of the mirror, causing speckles on the mirror surface. Before applying the adhesive, it is best to conduct a compatibility test to see if the adhesive is compatible with the material. The best effect is to use a specialized mirror adhesive.
5、 Installation of bathroom mirror lights
Bathroom mirrors generally require good lighting coordination, so it is necessary to have lights on the front or side of the mirror. When installing the front lamp, attention should be paid to prevent glare. It is recommended to install a lampshade or choose a lamp with Frosted glass surface.
Post time: May-26-2023