Today I will share with you some purchasing tips:
Preparatory work before purchasing a toilet:
1. Pit distance: refers to the distance from the wall to the middle of the sewage pipe. It is recommended to choose 305 pit distance if it is less than 380mm, and 400 pit distance if it is more than 380mm.
2. Water pressure: Some smart toilets have water pressure requirements, so you should measure your own water pressure in advance to prevent it from being flushed clean after use.
3. Socket: Reserve a socket next to the toilet at a height of 350-400mm from the ground. It is recommended to add a waterproof box
4. Location: Pay attention to the space of the bathroom and the floor space of the smart toilet installation

White Modern LED Display Warm Seat Smart Toilet

Next, let’s take a look at the points you need to pay attention to when buying a smart toilet.

1: Direct flush type
The flushing noise is loud, the anti-odor effect is poor, and the water storage area is small, and the inner wall of the toilet is prone to scaling.
Solution: Choose siphon type, which has good anti-odor effect, large water storage surface and low flushing noise.

2: Heat storage type
The water in the built-in heating water tank is required, which can easily breed bacteria, and repeated heating consumes electricity.
Solution: Choose the instant heating type, connect it to running water, and it will heat immediately, which is clean and hygienic and more energy-saving.

3: No water tank
Smart toilets are easily limited by water pressure and cannot flush. If the floor is high or the water pressure is unstable, it will be even more troublesome during peak water use periods.
Solution: Choose one with a water tank. There is no water pressure limit. You can enjoy strong momentum anytime and anywhere and rinse easily.

4: Single waterway
The water used for flushing the toilet and washing the body is in the same waterway, which is easy to cause cross-infection and is unhygienic.
Solution: Choose a dual water channel. The cleaning water channel and the water channel for flushing the toilet are separated from each other, making it cleaner and hygienic.

5: There is only one flip mode
It is very unfriendly to small apartments. If you move around the toilet at will, it is easy to flip the lid, which consumes electricity and is easy to break.
Solution: Choose one with adjustable flip distance. You can set it according to your own space size and needs. It’s a very considerate design.

6: Low waterproof level
The bathroom is a very humid place. If the waterproof level is too low, water may enter the toilet and malfunction, which is very unsafe.
Solution: Choose IPX4 waterproof grade, which can effectively prevent water vapor from entering the toilet. It is safer and can extend the service life.

7: The water cannot be flushed during a power outage.
It would be too embarrassing if there was a power outage, and it would be troublesome to have to carry water yourself.
Solution: Choose one that can be flushed during a power outage. The side buttons allow unlimited flushing. Even in a power outage, the water can be flushed normally without affecting the use.

I hope everyone can choose a satisfactory smart toilet~